electric hot water systems brisbane

Relighting a Pilot Light in your Gas Hot Water System

1. How do I relight the pilot light on my gas hot water system?

The process of relighting the pilot light on a gas hot water system can be done by following these steps:

Step 1: Locate the gas control valve on your hot water system. It is usually situated near the bottom of the tank.

Step 2: Turn the gas control valve to the "off" position and wait for at least five minutes to allow any lingering gas to dissipate.

Step 3: Locate the pilot light assembly. It is typically positioned near the bottom of the tank and marked as "pilot" or "ignition."

Step 4: Set the gas control valve to the "pilot" position and press down on it to release gas. While holding down the valve, use a long lighter or match to ignite the pilot light.

Step 5: Keep holding the gas control valve down for about a minute to ensure the pilot light stays lit. Then, slowly release the valve.

Step 6: If the pilot light doesn't remain lit after following these steps, it could indicate a more significant issue, and it's recommended to consult a professional technician.

Relighting the pilot light is an essential task in maintaining your gas hot water system's functionality. By following the steps carefully, you can ensure an efficient and reliable supply of hot water in your home.

Key Points:

• Locate the gas control valve on your hot water system.
• Turn the gas control valve to the "off" position and wait for at least five minutes.
• Locate the pilot light assembly near the bottom of the tank.
• Set the gas control valve to the "pilot" position and ignite the pilot light.
• Hold the gas control valve down for about a minute before releasing it.
• If the pilot light doesn't stay lit, consult a professional technician.

Dux Proflo 250L Electric Hot Water System

1. How does the Dux Proflo 250L Electric Hot Water System work?

The Dux Proflo 250L Electric Hot Water System operates using an electric heating element to heat the water stored in the tank. Here's a breakdown of its functioning:

Step 1: Water enters the tank through an inlet pipe connected to the main water supply.

Step 2: The electric heating element, located inside the tank, heats the water to the desired temperature.

Step 3: Once the water reaches the set temperature, the heating element automatically turns off.

Step 4: Hot water is then ready for use and can be accessed through outlets, such as faucets and showerheads, connected to the system.

Step 5: As hot water is drawn from the tank, fresh cold water enters to replace it. This helps maintain a continuous supply of hot water for your household needs.

The Dux Proflo 250L Electric Hot Water System is designed to provide efficient and reliable hot water supply for residential use. Its electric heating element ensures consistent performance and temperature control.

Key Points:

• The system heats water using an electric heating element.
• Water enters the tank through an inlet pipe.
• The heating element heats the water to the desired temperature.
• Once the set temperature is reached, the heating element turns off.
• Hot water can be accessed through outlets connected to the system.
• Fresh cold water enters the tank as hot water is drawn out.

Location:

Share :